Cobra CM-2206-2100kv Racing Edition
1114g Schub max.
3-4S
36,5g
5-6''
14,95 €

including 19% VAT., plus shipping

Old price: 22,85 €

Shipping time: 2 - 3 workdays*

Item number: 3055

Available now!

Details

Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.

The CM-2206-20 Racing Edition Motor was designed from the ground up to be the ultimate power source for 250mm FPV Racing Quads running on 4-cell Li-Po power! With 6x4.5 props attached, a set of four of these motors will produce 10 pounds of static thrust for blistering acceleration and incredible top end speeds.

The Cobra CM-2206 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2206 motors come without bullet connectors and feature extended pre-tinned motor leads that are 10 inches (254mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

The CM-2206 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.


Specification

Cobra CM-2206/20 Motor Specifications
 Stator Diameter  22.0 mm (0.866 in)
 Stator Thickness  6.0 mm (0.236 in)
 Number of Stator Slots  12
 Number of Magnet Poles  14
 Motor Wind  20 Turn Delta
 Motor Kv Value  2100 RPM per Volt
 No Load Current (Io)  0.85 Amps @ 10 Volts
 Motor Resistance (Rm) per Phase  0.098 Ohms
 Motor Resistance (Rm) Phase to Phase  0.065 Ohms
 Maximum Continuous Current  25 Amps
 Max Continuous Power (3-cell Li-Po)  280 Watts
 Max Continuous Power (4-cell Li-Po)  370 Watts
 Motor Weight  36.5 grams (1.29 oz.)
 Outside Diameter  27.0 mm (1.063 in.)
 Motor Shaft Diameter  3.00 mm (0.118 in.)
 Prop Shaft Diameter  5.00 mm (0.197 in.)
 Motor Body Length  16.5 mm (0.650 in.)
 Overall Shaft Length  35.3 mm (1.390 in.)
 Motor Timing  5-10 degrees
 PWM Frequency  8-20 KHz

Included

  • Motor Cobra CM-2206-2100kv
  • 4x M3x5mm Motor Mount Screws
  • 4x M3 Flat Washers
  • Machined Aluminum Prop Washer
  • Locking Prop Nut with Nylon Insert

Thrust max.: >1000g
KV: 2100kv
Weight: >36g
LiPo max.: 4S
Prop max.: 6''
Product weight: 0,04 Kg

Average product review

Write your first review and help others with their purchase decision:

Question on item

max. 500 characters

Other customers have also bought the following items
TBS Crossfire Micro Empfänger V2

TBS Crossfire Micro Empfänger V2

45,90 €
including 19% VAT., plus shipping
APC 6x4 Electric Pusher Prop

APC 6x4 Electric Pusher Prop

4,95 €
including 19% VAT., plus shipping
MenaceRC Raptor RHCP 5.8Ghz SMA

MenaceRC Raptor RHCP 5.8Ghz SMA

17,95 €
including 19% VAT., plus shipping
Omnibus F4 FC Pro V3

Omnibus F4 FC Pro V3

47,95 €
including 19% VAT., plus shipping
Hyperlite Floss 5 Racing Frame 14xx

Hyperlite Floss 5" Racing Frame 14xx

59,95 €
including 19% VAT., plus shipping
DYS FPV Antenne 5.8Ghz RHCP SMA

DYS FPV Antenne 5.8Ghz RHCP SMA

11,95 €
including 19% VAT., plus shipping